Rope Protector This PVC rope protector is compact and lightweight but still tough as nails! Strips of velcro running the length of the pad allow it to fully protect the rope while an accessory cord tether allows it to be positioned. Dimensions: L55 сm х W8.5 сm Weight: 45 g Materials Heavy duty 680g/m² PVC, 1100 dtex (Mehler Texnologies GmbH). Velcro: YKK Features Sleeve type protector with double Velcro closure Opportunity to enlarge the length and width Drawstring for fixing to rope One rope capacity: 9-12 mm Two rope capacity: 8-10 mm

Bolting Gear Bag Organize a hammer, bolting gear and other equipment. Volume: 3.5 L Dimensions: H25cm x 8cm x 14cm Weight: 115g Materials Heavy duty 680 g/m² PVC, 1100 dtex (Mehler Texnologies GmbH) Duraflex® buckles (National Molding Italia SRL) Features Bag closure - cord and stopper; flap with Velcro External holster for a hammer and secure lock ring Two internal webbing ring Bottom brass eyelets for water drainage *The bag sells empty, without a carabiner and a hammer. Available colors: water blue

Personal 5 L Bag The Personal 5 tackle sack is perfect for organizing gear inside the larger packs. It also works well for survey or holding aid climbing gear. Made from durable 680 g/m² PVC. Volume: 5 L Dimensions: Н32 сm х D14.5 сm Weight: 145 g Materials Heavy duty 680 g/m² PVC, 1100 dtex (Mehler Texnologies GmbH) Duraflex® buckles (National Molding Italia SRL) PA webbing Features Circular bottom One handle Bottom brass eyelet for water drainage Colors: yellow, red, orange, water blue, lime green

Rope Protector Heavy The Rope Protector Heavy is Landjoff's thicker and wider rope protector. Velcro the pad around the rope. Dimensions: L55 сm х W11 сm Weight: 75 g Materials High-strength, heavy duty 900g/m² PVC, 1100 dtex (Mehler Texnologies GmbH) Velcro: YKK Features Sleeve type protector with double Velcro closure Opportunity to enlarge the length and width Drawstring for fixing to rope Capacity: 16 mm Available colors: blue

Knee Pad A pair of padded, comfortable and adjustable knee pads with closed cell foam filling. Replaceable, anti-slip, elastic webbing. Side release buckles for adjusting. Replaceable 10mm closed cell foam pads (may fit up to 20mm). Materials Heavy duty 680g PVC with HF welded seams. Closed sell PU filling Color: black

H503c AA LH351D 4000K Neutral White High CRI Flood Headlamp The ZebraLight H503c AA has a 120 degrees spread for ease of movement through the cave or other low-light environment. Link to User Guide Compare all Models: Here Main Features and Specifications

• LED: Samsung LH351D
  • Nominal CCT: 4000K
  • CRI: 90+
  • Tint deviation: 3-Step
• User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
• Light Output (runtimes)
  • High: H1 264 Lm (0.9 hr) or H2 220 Lm (1.6 hr) /158 Lm (2.3 hrs) /97 Lm (4.2 hrs)
  • Medium: M1 52 Lm (8.5 hrs) or M2 24 Lm (21 hrs) /9.6 Lm (41 hrs) /3.3 Lm (4.5 days)
  • Low: L1 1.0 Lm (13 days) or L2 0.25 Lm (1.1 month) /0.06 Lm (2.2 months) /0.01 Lm (3.3 months)
  • Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
  • Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using Panasonic Eneloop Pro AA batteries. Remaining battery power, about 10-20%, after step-down are not counted towards the runtimes.
• Operating Voltage Range: 0.7V - 2.0V
• Battery: One AA size NiMH, lithium or alkaline battery. Panasonic Eneloop or Eneloop Pro is highly recommended. Batteries are not included in the box.
• Parasitic Drain: Negligible (much less than the self discharging of a battery)
• Beam Type
  • Flood, with 120 degree beam spread
• Dimensions
  • Head Diameter: 0.86 inch (21.8 mm)
  • Length: 2.76 inch (70.1 mm)
• Weight
  • 1 oz (29 gram)
  • 2 oz (55 gram) with an Eneloop AA battery
  • 2.8 oz (78 gram) with an Eneloop AA battery and headband
• Features
  • Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
  • All levels are current regulated
  • Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
  • Durable electronic soft-touch switch
  • Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
  • Precision machined unibody casing from premium grade aluminum bar stocks
  • Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
  • Durable natural hard anodized finish (Type III Class I)
  • Sealed and potted LED driver circuitry
  • Battery reverse polarity protection
  • Tempered optical grade glass
  • Battery power can be disconnected by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain
  • Waterproof to IPX8 (2 meters, 30 minutes)

Operations This light has 3 main levels (High, Medium, and Low) and a beacon-strobe mode. Each main level can be programmed to one of its two sub-levels. The second sub-level of each main levels can be further programmed to different brightness levels.

• Basic Operation
  • One short-click turns on the light to High or turns off the light.
  • Two short-click turns on the light to Medium.
  • Three short-click turns on the light to the beacon-strobe mode.
  • Press and hold (for over 0.6 seconds) turns on the light to Low and then Medium and High. Release at the desired level.
• Advanced Operation and Configuration
  • Press and hold to cycle from Low, Medium and High, release at the desired level to set. When press and hold, the light always cycle from Low to High regardless which level you are currently in.
  • Double click to toggle and select between the two sub-levels for that main level. Sub-level selections for the 3 main levels are memorized after the light is turned off and through battery changes.
  • The second sub-level (H2, M2 and L2) of each main levels can be further programmed to different brightness levels. At a main level, double-click 6 times to start configuration. On subsequent double-clicks the light will cycle through different brightness levels. Short click to turn off the light when finishing configurations. The selections for the second sub-levels are memorized after the light is turned off and through battery changes.
  • This light uses the main LED (flashing 1 to 4 times) to indicate the estimated remaining capacity of the battery. To start the battery indicator, (from Off) short-click 4 times without pause.
  • Beacon-strobe mode can be accessed from 3 short-clicks when the light is Off. Once in the beacon-strobe mode, you can double-click to cycle through different types of beacons and strobes. Beacon-strobe settings are memorized when the light is turned off and through battery changes.
• Multiple Mode Groups
  • This light comes with three mode groups, G5, G6 and G7. The G5, set as the factory default, can be selected with 5-click from OFF, while G6 and G7 can be selected with 6-click and 7-click from OFF respectively. Mode group selections are memorized after the light is turned off and through battery changes.
  • In all three mode groups
    • H can be either H1 or H2; M can be either M1 or M2; L can be either L1 or L2
    • from OFF: 1-click to H; 2-click to M; press and hold to cycle from L, M to H
  • In G5
    • H1 is fixed at , H2 can be Lm
    • M1 is fixed at Lm, M2 can be Lm
    • L1 is fixed at Lm, L2 can be Lm
  • In G6 and G7
    • H1, H2, M1, M2, L1 and L2 can be programmed to any of the 12 available brightness levels
    • Double-click 6 times at the H1, H2, ... L2 to enter the programming mode for that level. Once in the programming mode, use double-click to go up one level and triple-click to go down one level. Use 1-click to exit the programming mode
  • Three consecutive 5-click (or 6-click, 7-click) to reset the G5 (or G6, G7) back to the factory default settings

Accessories in the package

• Two o-rings
• Headband and a black silicone holder
• Pocket clip

 

Curtec Wide Mouth "Darren Drum" Keg Keep your valuables, food, and clothes dry with these wide mouth kegs. The screw lid with rubber gasket is both quick and easy to use. Considered by many to be a must-have for cave trips in wet caves, these kegs fit most of Landjoff's PVC packs. Features Food safe Material: HDPE Leak tight Color: white with red lid Manufacturer: Curtec 3.6 liter specs Diameter opening: 136 mm Diameter drum: 198 mm Total height: 171 mm Capacity: 3.6 liters/ 1.0 gal Product code: 7004 6 liter specs Diameter opening: 136 mm Diameter drum: 198 mm Total height: 263 mm Capacity: 6 liters/ 1.6 gal Product code: 7006

Reflective Accessory Cord Stiff accessory cord is woven with a reflective tracer for low-light environment. Great for tents, backpack, and trail marking. Not to be used for fall protection.  Color: orange Diameter: 1.8 mm Sold by the yard

Parachute Cord Parachute cord, paracord, or 550 cord is a handy material to have in your toolkit. Lightweight, kernmantle nylon cord has uses ranging from krafting to emergency preparedness. Have it on hand for home repairs and outdoors recreation and everything in between. Color: solid orange Sold in 10-foot increments.

Rock Lockster Side Release Buckle Made of acetal/POM 1.5" and 1" slot (size of webbing) available Webbing not including. 

Features: Bag made from CORDURA 560dtex and mesh for exellent water drainage. Reflective elements for better visibility. Integrated closed sell foam for additional floatation. Secure closure and quick one hand operation. Applicable to belts up to 50mm by two clips and a strap with buckle. Total nett weight: 650g   Rope specifications: Min. breakingload: 6,9 kN; with eight knot: 5,5 kN Do not sink in water. Do  not absorb water. Hi-visibility yellow   red color. Diameter: 8mm (0,315 in) Specific weight: 0,91 g/cm3 Nominal weight: 24 g/m Material: PP multifilament HT   Bag specifications: Capacity: 20m, 8mm floating rope Materials: CORDURA 560dtex, PVC mesh, acetal (POM) buckles.   Throw Bag 20 Colors: Yellow, Red, Blue